M2C 3492 ARRMA OUTCAST 8S FRONT OR REAR 7MM ISB SHOCK KIT
M2C 3492 ARRMA OUTCAST 8S FRONT OR REAR 7MM ISB SHOCK KIT
M2C 3492 ARRMA OUTCAST 8S FRONT OR REAR 7MM ISB SHOCK KIT
M2C 3492 ARRMA OUTCAST 8S FRONT OR REAR 7MM ISB SHOCK KIT
M2C 3492 ARRMA OUTCAST 8S FRONT OR REAR 7MM ISB SHOCK KIT

M2C 3492 ARRMA OUTCAST 8S FRONT OR REAR 7MM ISB SHOCK KIT

Regular price
£75.00
Sale price
£75.00
Regular price
Sold out
Unit price
per 
Tax included.

IT'S FINALLY HERE! THE M2C RACING ISB SHOCK KIT!!!!!

 

ENGINEERED FOR EXTREME BASHING, WITH 7MM TOOL STEEL SHOCK SHAFTS AND 7075-T6 ALUMINUM SHOCK ENDS WITH DELRIN BUSHINGS!

 

KIT ALSO INCLUDES OUR NEWLY DESIGNED DELRIN SHOCK CARTRIDGE AND ALL SILICONE O-RINGS.

 

THIS KIT WILL HELP YOU GET TO THE MOON, AND SURVIVE THE LANDING!!!

 

USING YOUR FACTORY SHOCK CAP AND BODY, THIS KIT REPLACES THE STOCK SHOCK INTERNALS WITH M2C BEEFCAKE!

 

FITS THE ARRMA OUTCAST 8S MODEL FRONT OR REAR. DOES NOT FIT EXB.

 

PLEASE CLICK THE ATTACHMENT LINK BELOW FOR DOWNLOADABLE INSTRUCTIONS

KIT INCLUDES:

 

3540 (2) M2C ISB 7MM SHOCK SHAFTS

 

3555 (2) DELRIN SHOCK END BUSHINGS

 

3564 (2) M2C ISB ALUMINUM 7MM SHOCK ENDS

 

 (1) SHOCK CARTRIDGE KIT INCLUDES

 

3542 (2) CARTRIDGE SPACERS

 

3543 (2) SHOCK CARTRIDGES

 

3545 (2) CARTRIDGE RETAINER CAPS

 

3546 (4) 7MM X 2 ORANGE ORINGS

 

3547 (2) 20 MM X 1.5 BLACK ORINGS

 

3556 (6) 2.5 X 8 FLATHEAD SCREWS

 

3566 (1) DELRIN SHOCK COLLAR DRILL BUSHING

 

3569 (1) 9/32 DRILL

 

!!!ASSEMBLY ORDER IS CRITICAL!!!!

1. USE A RELIABLE LUBRICANT LIKE GREEN SLIME OR SHOCK OIL

 

2. COAT THE 7MM ORINGS AND SHOCK SHAFT PRIOR TO ASSEMBLY.

 

3. PUT IN 2MM ORING, SPACER, ORING INTO CARTRIDGE BODY.

 

4. PUT ON RETAINER PLATE.

 

5. START ALL (3) 2.5MM SCREWS BUT DO NOT TIGHTEN DOWN

 

6. INSERT SHOCK SHAFT THRU CARTRIDGE.

 

7. PUT ON PISTON RETAINER PLATE AND SHOCK PISTON.

 

8. TIGHTEN RETAINER NUT.

 

9. SLIDE SHOCK SHAFT TO ALIGN IN CARTRIDGE.

 

10. TIGHTEN 2.5 MM SCREWS

 

11. INSTALL CARTRIDGE INTO SHOCK BODY (DO NOT OVER TIGHTEN)

 

12. INSTALL M2C ISB ALUMINUM SHOCK END ONTO SHAFT (THIS IS A CLOSE TOLERANCE FIT BE CAREFUL!!!!!)

 

13. FILL AND BLEED SHOCK AS PER MANUAL

 

14. INSTALL AND BASH!!!

 

M2C ISB SHOCK SHAFTS ARE BLACK OXIDE COATED FOR RUST PREVENTION. THIS COATING WILL WEAR OFF OVER TIME.