IT'S FINALLY HERE! THE M2C RACING ISB SHOCK KIT!!!!!
ENGINEERED FOR EXTREME BASHING, WITH 7MM TOOL STEEL SHOCK SHAFTS AND 7075-T6 ALUMINUM SHOCK ENDS WITH DELRIN BUSHINGS!
KIT ALSO INCLUDES OUR NEWLY DESIGNED DELRIN SHOCK CARTRIDGE AND ALL SILICONE O-RINGS.
THIS KIT WILL HELP YOU GET TO THE MOON, AND SURVIVE THE LANDING!!!
USING YOUR FACTORY SHOCK CAP AND BODY, THIS KIT REPLACES THE STOCK SHOCK INTERNALS WITH M2C BEEFCAKE!
FITS THE ARRMA KRATON 8S MODEL FRONT ONLY. DOES NOT FIT EXB.
PLEASE CLICK THE ATTACHMENT LINK BELOW FOR DOWNLOADABLE INSTRUCTIONS
KIT INCLUDES:
3541 (2) M2C ISB 7MM SHOCK SHAFTS
3555 (2) DELRIN SHOCK END BUSHINGS
3564 (2) M2C ISB ALUMINUM 7MM SHOCK ENDS
(1) SHOCK CARTRIDGE KIT INCLUDES
3542 (2) CARTRIDGE SPACERS
3543 (2) SHOCK CARTRIDGES
3545 (2) CARTRIDGE RETAINER CAPS
3546 (4) 7MM X 2 ORANGE ORINGS
3547 (2) 20 MM X 1.5 BLACK ORINGS
3556 (6) 2.5 X 8 FLATHEAD SCREWS
3566 (1) DELRIN SHOCK COLLAR DRILL BUSHING
3569 (1) 9/32 DRILL
!!!ASSEMBLY ORDER IS CRITICAL!!!!
1. USE A RELIABLE LUBRICANT LIKE GREEN SLIME OR SHOCK OIL
2. COAT THE 7MM ORINGS AND SHOCK SHAFT PRIOR TO ASSEMBLY.
3. PUT IN 2MM ORING, SPACER, ORING INTO CARTRIDGE BODY.
4. PUT ON RETAINER PLATE.
5. START ALL (3) 2.5MM SCREWS BUT DO NOT TIGHTEN DOWN
6. INSERT SHOCK SHAFT THRU CARTRIDGE.
7. PUT ON PISTON RETAINER PLATE AND SHOCK PISTON.
8. TIGHTEN RETAINER NUT.
9. SLIDE SHOCK SHAFT TO ALIGN IN CARTRIDGE.
10. TIGHTEN 2.5 MM SCREWS
11. INSTALL CARTRIDGE INTO SHOCK BODY (DO NOT OVER TIGHTEN)
12. INSTALL M2C ISB ALUMINUM SHOCK END ONTO SHAFT (THIS IS A CLOSE TOLERANCE FIT BE CAREFUL!!!!!)
13. FILL AND BLEED SHOCK AS PER MANUAL
14. INSTALL AND BASH!!!
M2C ISB SHOCK SHAFTS ARE BLACK OXIDE COATED FOR RUST PREVENTION. THIS COATING WILL WEAR OFF OVER TIME.