M2C 3325 ARRMA 8S PILLOW BALL RETAINER KIT

M2C 3325 ARRMA 8S PILLOW BALL RETAINER KIT

Regular price
£25.00
Sale price
£25.00
Regular price
Sold out
Unit price
per 
Tax included.

This kit is made using 6061 aluminum and delrin material for long wear. These pillow ball nuts are designed to lock down at the bottom to ensure they don't back out or move.

IT IS HIGHLY ADVISED THAT YOU PURCHASE THE PILLOW BALL INSERTION TOOL PN. 3327 FOR USE WITH THIS PRODUCT.

 

 

This kit is made using 6061 aluminum and delrin material for long wear. These pillow ball nuts are designed to lock down at the bottom to ensure they don't back out or move.

We have all fought the battle of trying to start the pillow ball retainers in the plastic hubs. One wrong turn and it cross threads. As a result of the design of the Arrma 8S hubs , it is especially difficult with the support ribs on the hubs. 

IT IS HIGHLY ADVISED THAT YOU PURCHASE THE PILLOW BALL INSERTION TOOL PN. 3327 FOR USE WITH THIS PRODUCT.

HOW TO INSTRUCTIONS:

PLACE THE WHITE DELRIN INSERT INTO THE PILLOW BALL RETAINER  AND PLACE THE PILLAR BALL NUT ON THE WRENCH

PUT THE PILLOW BALL  RETAINER IN THE HUB.

ROTATE THE WRENCH COUNTER CLOCK WISE UNTIL YOU FEEL THE THE PILLOW BALL SLIDE PAST THE FIRST THREAD IN THE HUB. 

IT WILL ACTUALLY GO FURTHER INTO THE HUB.

THEN TURN THE WRENCH CLOCK WISE SLOWLY AND SCREW THE PILLOW BALL NUT IN UNTIL YOU FEEL RESISTANCE.

THEN USE THE SUPPLIED (with the kit) 5MM OR 8MM HEX WRENCH TO TIGHTEN THE REST OF THE WAY.

YOU WILL FEEL THE PILLOW BALL RETAINER START TO TIGHTEN UP WITH THE WRENCH AS IT GETS CLOSE TO THE PILLAR BALL  

ONCE THE PLASTIC INSERT TOUCHES THE PILLOW BALL, BACK OFF APPROXIMATELY 1/8 TO 3/8 OF A TURN.

THE PILLOW BALL SHOULD FLOAT FREE WITH NO BINDING.