This chassis is made using 7075-T6 AIRCRAFT ALUMINUM and has a natural tumbled finish to remove burrs. This chassis has been tested by some of the hardest bashing guys in the Industry to assure that it will stand up to the riggers of hard bashing. This is a modular design and allow you to adjust the amount of flex you wish to have by removing the center brace screws. As pictured the center bracing is 17 mm thick. the top center brace is 9 mm thick.
This model comes with (2) custom made 1/2 inch round 7075-t6 braces. One is for the rear of the truck. The other is the tower to tower.
You will use the stock front bar since it did not change. ( this is to help keep down cost of the kit).
Our test team and I had a concern that over time the braces could become loose and damage the threads where the 6mm set screw screws into the braces. Also as with any truck that gets bashed
I have shortened the bars and put a 6mm jam nut that will be threaded on the set set screw. Once the correct distance has been set. You will lock down the jam nut to keep the bars tight.
You will also have to use the front drive shaft provided in the kit and replace the Kraton rear drive shaft with this replacement.
ASSEMBLY REQUIRED:our pictured chassis is 1009 grams (2.3)lbs