This stunning piece is a motor mount for the Arrma 6s 1/8 and 1/7 scale platform. It features the stock style convenient top bolts, but has a cool trick up its sleeve... a screw driven gear lash adjuster! 

Long gone are the days chasing that perfect gear lash. Having everything set in just about the right spot, just for it to move the second you tighten up the bolts.

The stainless steel screw serves dual purpose. Not only does it adjust the gear lash, but it also serves as an internal torque anchor. It ties the motor plate right to center mass of the mount.

Featuring cooling fins for both style and function. They may not be huge, but there's nearly a 100% increase of surface area right at the motor, where the turbulent air of the gears can sweep some heat away. No, it probably won't replace a motor heatsink/fan, however even little things can make a difference. Plus it looks badass!  


This will bolt into any of the Arrma 6s V4 BLX vehicles with the top loading center differential however the screw adjuster is low on the mount. On the Notorious/Outkast, and Mojave platforms with tall side guards, a hole may be drilled for easy access. Otherwise, you could use a wrench. 

This mount has more range in it than a factory mount does. You could run up to a 34t pinion on a 36t spur! 

Also available with a 30mm spacing motor plate to allow you to run LARGE motors up to 60mm in diameter! (You will need to trim the side guards on the Kraton for sure, possibly the same story with other models but I cannot guarantee it. You would need to do this with ANY mount you choose. Big motors are BIG!!) This adapter will allow you to run even larger gearing! (Up to a 42t pinion on a 46t spur!)